nases

12V Dual-Rail Power Board

Public
Star
Make a copy
NasesUyno nases

Make a 12V DC power board with 5V and 3.3V outputs, chamfered corners, mounting ears, and clearly labeled connectors.

EasyGerber AI

Here's the plan:

A 12V DC power board providing regulated 5V and 3.3V outputs in a chamfered, ear-mounted outline.
Requirements
  • •Separate screw-terminal input and output connectors, sharing ground, with readable voltage and polarity labels.
  • •Generated outline with chamfered body corners and four symmetric mounting ears with M3 clearance holes.
Assumptions
  • •Nominal 12V DC input; non-isolated outputs.
  • •Load currents are unspecified; usable output ratings and thermal limits require verification.
  • •Outline sized to fit the circuitry; component placement automatic.
Approved
Approved by NasesUyno nases
EasyGerber AI

Designed the 12V power board with 5V and 3.3V outputs, voltage/polarity-labeled screw terminals, chamfered corners, and four M3 mounting ears. The buck stages use Diodes' reference topology. Use correctly polarized, regulated 12V DC; verify the generated switching layout and usable output-current/thermal limits before use.

Schematic created: 15 parts, 8 nets in 330.37s
PCB layout completed in 0.53s
NasesUyno nases

position the connectors and use custom silkscreen for labels. designators should stay industry standard.

EasyGerber AI
Proposed changes

Components changed

3 components
  • J1
    • designator: J1 12V IN 1:+ 2:GND to J1
  • J2
    • designator: J2 5V OUT 1:+ 2:GND to J2
  • J3
    • designator: J3 3.3V OUT 1:+ 2:GND to J3

Component positions

3 changes
J1Pinned
X
After: 24 mm
Y
After: 5.2 mm
Rotation
After: 0°
Side
After: top
J2Pinned
X
After: 40 mm
Y
After: 5.2 mm
Rotation
After: 0°
Side
After: top
J3Pinned
X
After: 56 mm
Y
After: 5.2 mm
Rotation
After: 0°
Side
After: top

Silkscreen

4 changes
Text terminal-polarityMoved
Y
Before: 3 mmAfter: 20 mm
Text connector-input-labelAdded
X
After: 24 mm
Y
After: 14.5 mm
Rotation
After: 0°
Layer
After: top
Text
After: "12V IN"
Font
After: RobotoMono-Medium
Height
After: 1.6 mm
Text connector-5v-labelAdded
X
After: 40 mm
Y
After: 14.5 mm
Rotation
After: 0°
Layer
After: top
Text
After: "5V OUT"
Font
After: RobotoMono-Medium
Height
After: 1.6 mm
Text connector-3v3-labelAdded
X
After: 56 mm
Y
After: 14.5 mm
Rotation
After: 0°
Layer
After: top
Text
After: "3.3V OUT"
Font
After: RobotoMono-Medium
Height
After: 1.6 mm
Approved
EasyGerber AI

Positioned the 12V input, 5V output, and 3.3V output left-to-right along the bottom edge, with custom voltage and polarity silkscreen labels. Connector designators are now simply J1, J2, and J3, separate from their functional labels.

Schematic updated: 15 parts, 8 nets in 215.35s
PCB layout completed in 0.86s
NasesUyno nases

lets position all of the parts so its better organized

EasyGerber AI
Proposed changes

Component positions

12 changes
U1Pinned
X
After: 32 mm
Y
After: 30 mm
Rotation
After: 270°
Side
After: top
U2Pinned
X
After: 54 mm
Y
After: 30 mm
Rotation
After: 270°
Side
After: top
L1Pinned
X
After: 39 mm
Y
After: 30 mm
Rotation
After: 0°
Side
After: top
L2Pinned
X
After: 61 mm
Y
After: 30 mm
Rotation
After: 0°
Side
After: top
C1Pinned
X
After: 28 mm
Y
After: 30 mm
Rotation
After: 90°
Side
After: top
C2Pinned
X
After: 36 mm
Y
After: 24 mm
Rotation
After: 0°
Side
After: top
C3Pinned
X
After: 42 mm
Y
After: 24 mm
Rotation
After: 0°
Side
After: top
C4Pinned
X
After: 32.5 mm
Y
After: 33.2 mm
Rotation
After: 0°
Side
After: top
C5Pinned
X
After: 50 mm
Y
After: 30 mm
Rotation
After: 90°
Side
After: top
C6Pinned
X
After: 58 mm
Y
After: 24 mm
Rotation
After: 0°
Side
After: top
C7Pinned
X
After: 64 mm
Y
After: 24 mm
Rotation
After: 0°
Side
After: top
C8Pinned
X
After: 54.5 mm
Y
After: 33.2 mm
Rotation
After: 0°
Side
After: top
Approved
EasyGerber AI

Arranged the regulators, inductors, and capacitors into two matching power-stage groups above the existing connector row, giving every part a fixed position. Custom voltage/polarity labels and standard designators are preserved; review the generated buck-converter routing before fabrication.

PCB layout completed in 0.51s
NasesUyno nases

perfect and we should rotate the connectors 180 degrees right

EasyGerber AI
Proposed changes

Component positions

3 changes
J1Moved · Rotated
Y
Before: 5.2 mmAfter: 5.967 mm
Rotation
Before: 0°After: 180°
J2Moved · Rotated
Y
Before: 5.2 mmAfter: 5.967 mm
Rotation
Before: 0°After: 180°
J3Moved · Rotated
Y
Before: 5.2 mmAfter: 5.967 mm
Rotation
Before: 0°After: 180°
Approved
EasyGerber AI

Rotated J1–J3 by 180° so their wire-entry openings face outward, with a small inward adjustment to maintain board-edge clearance.

PCB layout completed in 0.53s
NasesUyno nases

thanks, could you please put the connectors on the other side? (top side) instead of bottom

EasyGerber AI

A quick clarification before I continue:

Moving J1–J3 to the top edge would overlap the fixed power-stage components and title. How should I make room?
NasesUyno nases
EasyGerber AI
Proposed changes

Component positions

15 changes
J1Moved · Rotated
Y
Before: 5.967 mmAfter: 34.033 mm
Rotation
Before: 180°After: 0°
J2Moved · Rotated
Y
Before: 5.967 mmAfter: 34.033 mm
Rotation
Before: 180°After: 0°
J3Moved · Rotated
Y
Before: 5.967 mmAfter: 34.033 mm
Rotation
Before: 180°After: 0°
U1Moved
Y
Before: 30 mmAfter: 15 mm
U2Moved
Y
Before: 30 mmAfter: 15 mm
L1Moved
Y
Before: 30 mmAfter: 15 mm
L2Moved
Y
Before: 30 mmAfter: 15 mm
C1Moved
Y
Before: 30 mmAfter: 15 mm
C2Moved
Y
Before: 24 mmAfter: 9 mm
C3Moved
Y
Before: 24 mmAfter: 9 mm
C4Moved
Y
Before: 33.2 mmAfter: 18.2 mm
C5Moved
Y
Before: 30 mmAfter: 15 mm
C6Moved
Y
Before: 24 mmAfter: 9 mm
C7Moved
Y
Before: 24 mmAfter: 9 mm
C8Moved
Y
Before: 33.2 mmAfter: 18.2 mm

Silkscreen

5 changes
Text power-titleMoved
Y
Before: 37 mmAfter: 3.5 mm
Text terminal-polarityMoved
Y
Before: 20 mmAfter: 22 mm
Text connector-input-labelMoved
Y
Before: 14.5 mmAfter: 25.5 mm
Text connector-5v-labelMoved
Y
Before: 14.5 mmAfter: 25.5 mm
Text connector-3v3-labelMoved
Y
Before: 14.5 mmAfter: 25.5 mm
Approved
EasyGerber AI

Moved J1–J3 to the top edge with wire entries facing outward, and shifted both power-stage groups and the title lower without changing the board size. Custom voltage/polarity labels, standard designators, and mounting holes are preserved; review the regenerated buck-converter routing before fabrication.

PCB layout completed in 0.49s
NasesUyno nases

for j1 j2 j3 could you clearly label which one is gnd which ones is 12v in/5v out 3.3./out (the pins).

EasyGerber AI
Proposed changes

Silkscreen

7 changes
Text connector-input-labelMoved · Resized · Edited
Y
Before: 25.5 mmAfter: 26.2 mm
Text
Before: "12V IN"After: "PIN 1: +12V IN"
Height
Before: 1.6 mmAfter: 1.3 mm
Text connector-5v-labelMoved · Resized · Edited
Y
Before: 25.5 mmAfter: 26.2 mm
Text
Before: "5V OUT"After: "PIN 1: +5V OUT"
Height
Before: 1.6 mmAfter: 1.3 mm
Text connector-3v3-labelMoved · Resized · Edited
Y
Before: 25.5 mmAfter: 26.2 mm
Text
Before: "3.3V OUT"After: "PIN 1: +3.3V OUT"
Height
Before: 1.6 mmAfter: 1.3 mm
Text j1-ground-pin-labelAdded
X
After: 24 mm
Y
After: 23.9 mm
Rotation
After: 0°
Layer
After: top
Text
After: "PIN 2: GND"
Font
After: RobotoMono-Medium
Height
After: 1.3 mm
Text j2-ground-pin-labelAdded
X
After: 40 mm
Y
After: 23.9 mm
Rotation
After: 0°
Layer
After: top
Text
After: "PIN 2: GND"
Font
After: RobotoMono-Medium
Height
After: 1.3 mm
Text j3-ground-pin-labelAdded
X
After: 56 mm
Y
After: 23.9 mm
Rotation
After: 0°
Layer
After: top
Text
After: "PIN 2: GND"
Font
After: RobotoMono-Medium
Height
After: 1.3 mm
Text terminal-polarityRemoved
X
Before: 40 mm
Y
Before: 22 mm
Rotation
Before: 0°
Layer
Before: top
Text
Before: "ALL TERMINALS: 1=+ 2=GND"
Font
Before: RobotoMono-Medium
Height
Before: 1.2 mm
Approved
EasyGerber AI

Added a clear pin legend beneath each connector: pin 1 is +12V IN on J1, +5V OUT on J2, and +3.3V OUT on J3; pin 2 is GND on all three.

PCB layout completed in 0.55s
NasesUyno nases

just write at the pin position, you can rotate silkscreen. write simple and concise

EasyGerber AI
Proposed changes

Silkscreen

6 changes
Text connector-input-labelMoved · Rotated · Resized · Edited
X
Before: 24 mmAfter: 21.46 mm
Y
Before: 26.2 mmAfter: 25.8 mm
Rotation
Before: 0°After: 90°
Text
Before: "PIN 1: +12V IN"After: "12V IN"
Height
Before: 1.3 mmAfter: 1.2 mm
Text connector-5v-labelMoved · Rotated · Resized · Edited
X
Before: 40 mmAfter: 37.46 mm
Y
Before: 26.2 mmAfter: 25.8 mm
Rotation
Before: 0°After: 90°
Text
Before: "PIN 1: +5V OUT"After: "5V OUT"
Height
Before: 1.3 mmAfter: 1.2 mm
Text connector-3v3-labelMoved · Rotated · Resized · Edited
X
Before: 56 mmAfter: 53.46 mm
Y
Before: 26.2 mmAfter: 25.1 mm
Rotation
Before: 0°After: 90°
Text
Before: "PIN 1: +3.3V OUT"After: "3.3V OUT"
Height
Before: 1.3 mmAfter: 1.2 mm
Text j1-ground-pin-labelMoved · Rotated · Resized · Edited
X
Before: 24 mmAfter: 26.54 mm
Y
Before: 23.9 mmAfter: 26.8 mm
Rotation
Before: 0°After: 90°
Text
Before: "PIN 2: GND"After: "GND"
Height
Before: 1.3 mmAfter: 1.2 mm
Text j2-ground-pin-labelMoved · Rotated · Resized · Edited
X
Before: 40 mmAfter: 42.54 mm
Y
Before: 23.9 mmAfter: 26.8 mm
Rotation
Before: 0°After: 90°
Text
Before: "PIN 2: GND"After: "GND"
Height
Before: 1.3 mmAfter: 1.2 mm
Text j3-ground-pin-labelMoved · Rotated · Resized · Edited
X
Before: 56 mmAfter: 58.54 mm
Y
Before: 23.9 mmAfter: 26.8 mm
Rotation
Before: 0°After: 90°
Text
Before: "PIN 2: GND"After: "GND"
Height
Before: 1.3 mmAfter: 1.2 mm
Approved
EasyGerber AI

Replaced the verbose legends with short, rotated labels aligned with each connector pin: 12V IN, 5V OUT, 3.3V OUT, and GND.

PCB layout completed in 0.52s
NasesUyno nases

for the 12v dc power title silkscreen can we be more descriptive? e.g. 12v dc to 5v/3.3v or something similar

EasyGerber AI
Proposed changes

Silkscreen

1 change
Text power-titleEdited
Text
Before: "12V DC POWER"After: "12V DC TO 5V/3.3V"
Approved
EasyGerber AI

Updated the silkscreen title to “12V DC TO 5V/3.3V”.

PCB layout completed in 0.54s
Loading PCB viewer...